Casio Privia PX-160 User Manual page 24

Configuring Settings with the Keyboard
Parameter List
■ Tones
Parameter Settings
Tone selection See page EN-8.
7
Default: GRAND
PIANO
(CONCERT)
Reverb Off (OFF), 1 to 4
8
Default: 2
Chorus Off (OFF), 1 to 4
9
Default: 2
Brilliance –3 to 0 to 3
bo
Default: 0
Layer balance –24 to 0 to 24
bq
Default: 0
Damper noise Off (OFF), On (ON)
cm
Default: On
Duet pan Off (OFF), On (ON)
cn
Default: Off
■ Song/Metronome
Parameter Settings
Tempo (TEMPO) 20 to 255
5
Default: 120
Song select 01 to 70
6
(MUSIC Default: 01
LIBRARY
SELECT)
Song volume 00 to 42
bm
Default: 42
Metronome beat 0, 2, 3, 4, 5, 6
bk
(METRONOME Default: 4
BEAT)
Metronome 00 to 42
bn
volume Default: 36
EN-22
Operation
Type Description
(page EN-20)
A Assigns a tone to the keyboard.
(page EN-8)
D Specifies the reverb of notes.
(page EN-11)
D Controls the breadth of notes.
(page EN-11)
B Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer.
B Specifies the volume balance
between the main tone and the
layered tone. (page EN-10)
D Enables/disables damper noise
output. (page EN-7)
D When turned on, outputs the left
side keyboard tone from the left
speaker and the right side
keyboard tone from the right
speaker while duet is turned on.
(page EN-12)
Operation
Type Description
(page EN-20)
B (+/–) Specifies the tempo of Music
C (0 to 9) Library songs, the metronome,
recording and playback, etc.
(page EN-11)
B (+/–) Selects a Music Library tune.
C (0 to 9) (page EN-15)
B Sets the volume level of Music
Library playback.
A Specifies the metronome beat.
(page EN-11)
B Specifies the metronome volume.
(page EN-12)
Remarks
• To return the setting to its initial default (0),
press [+] and [–] at the same time.
• Supported only when a piano tone is being
used. Reverb is not applied when this
parameter is turned on.
Remarks
• Always enter three digits when using the
number keys (0 to 9) to input a value.
Example:
To input 90, enter 0, 9, 0 (leading
zero required).
• During recording, pressing + and – at the
same time sets a value of 120.
• Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example:
To input 8, enter 0, 8 (leading
zero required).
• This setting cannot be changed while
recording.
• This setting cannot be changed while
recording.
• The metronome beat setting cannot be
changed while playback of a Music Library
tune is in progress.