Bosch PFZ 600 Operating Instructions Manual page 11

Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
To ensure long term flawless operation of the ma-
chine, the SDS saw blade holder should be cleaned
regularly (PFZ 700 PE).
This can be done by lightly tapping the machine with
the foot plate on a flat surface without a saw blade
inserted (see figure
G
If necessary, the SDS saw blade holder should be
cleaned by blowing out with compressed air (see
figure ).
H
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an authorized after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
Guarantee
We guarantee Bosch appliances in accordance with
statutory/country-specific regulations (proof of pur-
chase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of complaint please send the machine, un-
dismantled, to your dealer or the Bosch Service
Centre for electric power tools.
Environmental Protection
Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
11 • 2 609 931 730 • TMS • 06.06.01
).
Service and Customer Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
................................
Advice line
Fax
................................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
......................................
Fax
......................................................
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
..................................................
Fax
..................................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
........................................................
Fax
........................................................
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 50 144 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
Dr. Gerhard Felten
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 4
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
.........................
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
Dr. Eckerhard Strötgen