Advertisement
RX-7010RBK/RX-7012RSL
Removing each board connected to the
rear side of the audio board
Prior to performing the following procedure, remove
the top cover and the rear panel.
1.
Cut off the tie band fixing the harness.
2.
Disconnect the DSP board from connector CN481 on
the audio board.
3.
Disconnect the audio input board, DVD board Video
board and the S video board from connector CN421,
CN431,CN441 and CN461 on the audio board.
4.
Disconnect the tuner board from connector CN411
and CN412 on the audio board.
CN421
CN431
1-4
(See Fig.5 to 8)
Tie band
CN461
CN441
Fig.8
Audio
board
Tie band
DSP
board
CN481
CN421
Audio
input
board
CN431
DVD
Video
board
board
CN481
DSP board
Audio
input
board
Tuner
board
CN421
CN411
CN412
CN411
Tie band
CN412
S Video
CN461
CN441
board
Fig.5
Fig.6
DVD
Video
board
S Video
board
board
CN461
CN441
CN431
Fig.7
Tie band
Tuner
board
Advertisement
