Troubleshooting - SACKit WOOFit S User Manual

Troubleshooting

Connection problems
WOOFit S Bluetooth will lock on to the
last connected device, which
requires the connection to be
disconnected before a new unit to
be connected to WOOFit S. This can
be done on the connected device (in
Bluetooth settings) or by resetting the
speaker. WOOFit S speaker is reset by
holding the mode button down for 3
seconds and disconnect the Bluetooth
signal. The speaker is now ready to
connect with a new Bluetooth device.
9
Audio quality problems
If the audio quality is poor, a reason
might be low battery level. Therefor
always try to fully charge WOOFit S to
secure the absolutely best audio quality.
Warning
To prevent damage, fire or electric
shock, it is strictly forbidden to remove
or replace parts of the unit. Always
consult a professional workshop or a
qualified service center if the unit has
been damaged.