Toshiba RAS-05J2KVG-TR Owner's Manual page 4

1 INDOOR UNIT DISPLAY
1 ECO (White)
2 1
2 Wi-Fi access (White) w
3 Hi-Power (White)
4 Timer (White)
5 Operation (White)
3 4 5
● Display brightness can be adjusted, follow procedure on ".
w
Require Wireless LAN connecting adapter which available as accessory.
2 PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following
the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
3. Insert the batteries.
3 AIRFLOW DIRECTION
1
Press
the desired vertical direction.
Press
2
automatically and press again to
stop.
For horizontal direction, adjust
3
manually.
Note:
● Do not move the louver manually by others.
● The louver may automation positioning by some operation mode.
4 REMOTE CONTROL
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 Off timer button (OFF)
9 High power button (Hi-POWER)
! ECO/SILENT button (ECO/SILENT)
" Clear button (CLEAR)
# Check button (CHECK)
5 AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation
1. Press
2. Press : Set the desired temperature.
Min. 17°C, Max. 30°C
3. Press : Select AUTO, LOW , LOW+
MED+ , HIGH
OM_1122950209_EN.indd 4 OM_1122950209_EN.indd 4
.
: Move the louver in
: Swing the air
1
3
2
7
9
8
#
: Select A.
, MED
or QUIET .
COOLING / HEATING / FAN ONLY
6
OPERATION
1. Press
2. Press
Cooling and Heating : Min. 17°C, Max. 30°C
Fan Only: No temperature indication
3. Press
MED+ , HIGH
7 DRY OPERATION
For dehumidification, a moderate cooling performance is controlled
automatically.
1. Press
2. Press
Note: Dry mode fan speed is set to Auto only.
Hi-POWER OPERATION
8
To automatically control room temperature and airflow for faster cooling or
heating operation (except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
Note: Hi-POWER opteration symbol will appear on remote contal display.
9 ECO / SILENT OPERATION
ECO OPERATION
To automatically control room temperature to save energy (Except in DRY
and FAN ONLY mode)
Note: Cooling operation : the set temperature will increase automatically 1
degree / hour for 2 hours (maximum 2 degree increase). For Heating
operation the set temperature will decrease.
SILENT OPERATION
To reduce outdoor sound level during operation (Except in DRY and FAN
ONLY mode)
Note: Though operating silently, the Heating or Cooling capacity is still
prioritized to ensure having sufficient comfort inside the room.
ECO and SILENT operation setting
Press : Start and stop the operation.
Note: ECO and SILENT operation symbol will appear on remote control
SILENT display.
4
6
5
10 TIMER OPERATION
!
"
Set the timer when the air conditioner is operating.
1
Press
2
Press
3
Press
4
Press
Note: TIMER opteration symbol will appear on remote contal display.
,
: Select Cool , Heat , or Fan only
: Set the desired temperature.
: Select AUTO, LOW , LOW+ , MED
or QUIET .
: Select Dry .
: Set the desired temperature Min 17ºC, Max 30ºC.
NORMAL ECO SILENT
Setting the OFF timer
for enter OFF timer setting.
for select desired OFF timer. (0.5 - 12 hrs)
for set OFF timer.
again for cancel OFF timer.
.
,
20/12/2561 BE 11:21 20/12/2561 BE 11:21