Table of Contents
Advertisement
1
Explanation of symbols and safety information
Risk of damage due to operator error
Operator errors can result in personal injury and damage
to property.
B Ensure that children never operate this appliance
unsupervised or play with it.
B Ensure that only people who know to operate this
appliance correctly have access to it.
Installation, conversion
Insufficient ventilation may cause dangerous flue gas
leaks.
B Only have the appliance installed or modified by a
trained and certified heating contractor.
B Never change any parts in contact with flue gas.
B Do not cover or reduce the size of ventilation openings
in doors, windows and walls. If draft-proof windows are
fitted, ensure there is an adequate supply of
combustion air to the room.
B Ensure that the boiler installation room remains frost
free.
B The heating system must be installed and operated in
accordance with state of the art technology as well as
all applicable national, state, and local codes, rules,
and regulations.
B Do not use the boiler room for drying laundry.
Inspection and maintenance
Heating systems should be regularly maintained for the
following reasons:
• to achieve a high level of efficiency and to operate the
system economically (low fuel consumption),
• to achieve a high level of operational safety,
• to maintain the cleanest combustion.
B Recommendation for customers: Sign a
maintenance and inspection contract with a trained
and certified contractor for an annual inspection and
demand-dependent maintenance.
B The operator is responsible for the general and
environmental safety of the heating system.
B Immediately correct all faults to prevent system
damage.
B Use only original Buderus spare parts. Damage caused
by the use of spare parts not supplied by Buderus are
excluded from the Buderus warranty.
Explosive, flammable, and easily combustible
materials
B Never use or store flammable or easily combustible
materials (paper, thinners, paints etc.) near the
appliance.
4
Combustion air/room air
B Keep the supply of combustion/room air free of
corrosive substances (e.g. halogenated hydrocarbons
that contain chlorine or fluorine compounds). This will
help prevent corrosion.
B Prevent heavy accumulation of dust.
Instructing the customer
B Instruct customers about the functions and operation
of the appliance.
B Inform the customer that they must not carry out any
modifications or repairs.
B Only use the boiler for its intended purpose and only
when it is in working order.
Disposal
B Dispose of packaging in an environmentally
responsible manner.
B All heating system components that have to be
replaced should be disposed of in environmentally-
responsible manner at an authorized disposal site.
The right fuel
This system requires the correct fuel to ensure a proper
operation. During commissioning, your system installer
will enter the correct type of fuel, which your system
requires, into the table below (
Danger of water damage
B Do not use the appliance if any part of it has been
under water.
B Call a trained and certified contractor immediately to
check the appliance and replace any controls or gas
valve components that have been under water.
Other important information
B If the system overheats or the gas supply does not shut
off, do not switch off or disconnect the power supply to
the pump. Instead, you should shut off the gas supply
to the heating system.
Logano G615 - We reserve the right to make technical changes without notice!
Chapter 2.4, page 7).
Advertisement
Table of Contents
