Crestron CPU2 RACK2 Processor Card: CPU2 Description The CPU2 Processor Card is the central processor unit of the RACK2 Card Cage System. The CPU2 performs the execution of the Crestron program and Crestron SIMPL+ and the expansion cards installed in the RACK2 Card Cage System.
When shipped, the RACK2 Card Cage System has the CPU2 installed. The following procedure can be used to install (or re-install) or replace the CPU2. Items required to install or replace the CPU2 are already attached to the unit. The only tool required is a grounding strap.
Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the CPU2, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.
This Agreement may only be modified by a writing signed by an authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This is the entire agreement between Crestron and You relating to the Software and it supersedes any prior representations, discussions, undertakings, communications or advertising relating to the Software.
“applets” incorporated into the Software), the accompanying media and printed materials, and any copies of the Software are owned by Crestron or its suppliers. The Software is protected by copyright laws and international treaty provisions. Therefore, you must treat the Software like any other copyrighted material, subject to the provisions of this Agreement.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
Need help?
Do you have a question about the CPU2 and is the answer not in the manual?
Questions and answers