Devon&Devon Kalos Assembly Instructions Manual page 60

KALOS BASIN ASSEMBLY INSTRUCTIONS - COMPOSITION B
1 - After removing the components from their packing, lay the basin on the floor on
some cardboard or other material that will keep the product intact. Proceed with
assembling the supplied drain fitting and the tap.
E
N
2 - Use a pencil to mark the set height and distance on the wall and mark where to
G
make the holes, which should correspond to those on the back of the basin. After
using a spirit level to check that the marks are perfectly aligned, drill into the wall.
Check the holes again with the spirit level.
60