Bekapcsológomb-Panel; Removing The Power-Button Board - Dell Alienware Aurora R11 Service Manual

Steps
1. Align the screw hole of the AlienFX LED board to the screw hole on the front bezel.
2. Replace the four screws (M3x4) that secure the AlienFX LED board to the front bezel.
3. Connect the AlienFX LED board cable from a Y-cable.
Next steps
1. Install the front bezel.
2. Install the top-cover.
3. Install the right-side cover.
4. Install the left-side cover.
5. Follow the procedure in
Bekapcsológomb-panel

Removing the power-button board

Prerequisites
1. Follow the procedure in
2. Remove the left-side
3. Remove the right-side
4. Remove the top-cover.
5. Remove the front bezel.
About this task
The following images indicate the location of the power-button board and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
cover.
cover.
computer.
computer.
Alkatrészek eltávolítása és beszerelése 89