Advertisement
NOTES:
1) If when setting the base to TEST LOW mode, if handset beeps 3 times, press 2, 5, 8, 0
simultaneously and then disconnect battery. Re-install battery, place unit on cradle to get
security codes and tries again.
2) Only KX-TC1703 with marks BS JIG/HS JIG can be used for troubleshooting. However,
regular production set also can be used as a JIG.
Fig. Using TC1703 Base Unit-jig.
* KX-TC1703 is used as the jig.
7.7.3. RF Check Flowchart
Advertisement
