Creative Xmod Wireless User Manual page 9

Turning on Xmod Wireless or enabling Standby mode
Press the Power/Standby button
Wireless or enable Standby mode. For Power/Standby LED information, see
below.
IMPORTANT
To save your volume and X-Fi enhancements on/off settings,
enable Standby mode. The Power/Standby LED lights up red. You
may then unplug Xmod Wireless from your computer.
NOTES
You can also press down and hold the Play/Pause button
your Xmod Wireless for 3 seconds to enable Standby mode. To turn
on Xmod Wireless, press the Play/Pause button.
Returning to factory default settings
Press and hold the Previous/Rewind and Next/Fast-forward buttons on your
Xmod Wireless together for three seconds. The Volume LED ring lights up.
For more information, see "FAQs" on page 14.
Understanding the Power/Standby LED
LED
Blue
Red
NOTES
For more information on the Link LED, see the Creative X-Fi
Wireless Receiver User's Guide.
on your remote control to turn on Xmod
Behavior
Stable
Stable
Flashing
Using Your Xmod Wireless 8
Status
Turned on and ready for use.
In Standby mode.
Muted.
on