Omega VG-2501 User Manual page 50

EN
5. ASSEMBLY
INSTALLING POLE AND PLANK
Tightening 4 pieces of pole (part 2) and assembling plank (part 3) as shown in FIG.1 and FIG 2.
FIG.1
WARNING/ CAUTION
INSTALLING POLE AND PLANK
Pole must to be tightened by hand. Beating the plank if necessary to make sure it is
fixed in place.
INSTALLING HANDLE
Install handle and lower cap on the rubber cover,
and tighten four M5×25 screws.
See assembly video at
www.yaros.es
FIG.2
10