Table of Contents
Advertisement
Quick Links
PIXAPRO Ltd.
UNIT 5 Sterling Park
Pedmore Road
Brireley Hill
West Midlands
DY5 1TB
Tel: +44 (0)121 552 3113
E-mail: info@essentialphoto.couk
essentialphoto.co.uk
Made in China
Pioneering Li-ion Camera Flash
INSTRUCTION MANUAL
Before using this product:
Please read this user manual carefully in order to ensure your safety
and the proper operation of this product. Keep for future reference.
Advertisement
Table of Contents
Related Manuals for Pixapro Li-ion580 III F
Summary of Contents for Pixapro Li-ion580 III F
- Page 1 Pioneering Li-ion Camera Flash INSTRUCTION MANUAL PIXAPRO Ltd. Before using this product: Please read this user manual carefully in order to ensure your safety UNIT 5 Sterling Park and the proper operation of this product. Keep for future reference. Pedmore Road...
- Page 2 Always keep this product dry. Do not use in rain or in damp conditions. This Li-ion580 III F camera flash applies to FUJIFILM series Do not disassemble. Should repairs become necessary, this cameras and is compatible with TTL autoflash. With this TTL product must be sent to an authorized maintenance center.
-
Page 3: Table Of Contents
Warning Name of Parts Body Control Panel Dot-matrix LCD Panel LCD Panel in Three Modes What's in the Box of Li-ion580 III F Kit? Separately Sold Accessories Battery LED Modeling Lamp Attaching to a Camera Power Management Flash Mode — TTL Autoflash... -
Page 4: Name Of Parts
● LCD Panel Name of Parts (1)TTL Autoflash Zoom : zoom display (Page 23) Focus length (Page 23) : Automatic : Manual(Page 13) TTL : autoflash Distance indicator display Flash exposure compensation amount ● The display will only show the settings currently applied. ●... -
Page 5: Lcd Panel In Three Modes
What’s in the Box of Li-ion580 III F Kit? (4) Radio Transmission Shooting ● 1. Flash Unit 2. Lithium Battery 3. USB Battery Charger ● Transmitter Unit (TX) 4. USB Cable 5. Charger 6. Mini Stand Flash mode 7. Protection Case 8. -
Page 6: Battery
Battery LED Modeling Lamp ● Press the Modeling Lamp Setting button to set the modeling lamp. Features Short press the Set Button to turn on or off the modeling lamp. 1. This flash unit uses Li-ion battery which has long runtime. When turning the modeling lamp on, turn the select dial to set its The available charge-and-discharge times are 450. -
Page 7: Flash Mode - Ttl Autoflash
C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-STBY, Page 24) C.Fn Receiver Auto Power Off Timer is set to 60 minutes by default. Another option “30 minutes” is available. (C.Fn- RX STBY, Page 24) Flash Mode —... -
Page 8: M: Manual Flash
M: Manual Flash Multi: Stroboscopic Flash The flash output is adjustable from 1/1 full power to 1/256th power With stroboscopic flash, a rapid series of flashes is fired. It can be in 1/10th stop increments. To obtain a correct flash exposure, use a used to capture a multiple images of a moving subject in a single hand-held flash meter to determine the required flash output. -
Page 9: Wireless Flash Shooting: Radio (2.4G) Transmission
Maximum Stroboscopic Flashes: Positioning and Operation Range (Example of wireless flash shooting) Flash output ● Autoflash Shooting with One Receiver Unit TRANSMITTER RECEIVER 1/16 1/32 1/64 Transmission distance is about 100m. 1/128 1/256 ● Use the supplied mini stand to position the receiver unit. Flash 20-50 60-100... -
Page 10: Wireless Settings
Using Automatic Wireless Flash with a Single Receiver Unit flash mode. Transmitter Unit Setting Short press the <MODE> ● Attach a Li-ion580 III F button to gain Multi mode. camera flash on the camera and set it as the transmitter unit. - Page 11 Receiver Unit Setting Using Automatic Wireless Flash with Multiple Receiver Units ● Set the Li-ion580 III F that When stronger flash output or to be controlled as the more convenient lighting operation wireless receiver unit. is needed, increase the number of ●...
-
Page 12: M: Wireless Flash Shooting With Manual Flash
7. M: Wireless Flash Shooting with Manual Flash The Reason & Solution of Not Triggering in PIXAPRO 2.4GHz Wireless This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash output setting for each receiver unit 1. -
Page 13: Bounce Flash
Bounce Flash C.Fn: Setting Custom Functions By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can The following table lists the available and unavailable custom soften shadows behind the subject for a more natural-looking shot. functions of this flash. -
Page 14: Protection Function
Protection Function Technical Data Model 1. Over-Temperature Protection Li-ion580 III F Compatible Cameras FUJIFILM cameras (TTL autoflash) ● To avoid overheating and deteriorating the flash head, there is Power (1/1 output) 76Ws over-temperature protection in the system. When continuously Guide No.(1/1 output, GN≈60 (m ISO100) -
Page 15: Troubleshooting
If there is a problem, refer to this Troubleshooting Guide. line is applicable. The Camera Flash does not fire. ● As the firmware upgrade needs the support of PIXAPRO G3 ● The camera flash is not attached securely to the camera. software, please download and install the "PIXAPRO G3 →Attach the camera’s mounting foot securely to the camera. - Page 16 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Li-ion580 III F and is the answer not in the manual?
Questions and answers