Page 2
Thank you for purchasing this PIXAPRO product. heavy so that an HyBRID360 on your camera may damage the camera's PIXAPRO HyBRID360 flash system is an powerful bare bulb flash with an external hotshoe. power pack, wireless manual power control, and a range of dedicated light shaping accessories.
Page 3
22. Select Dial 3. Rotate Accessory Locking Ring (2) clockwise to lock it up. Do not over- The flash unit is not powered by itself, but draws power from PIXAPRO power pack tighten. PowerPack Dual Output (sold separately). - 03 -...
Page 4
The flash unit is not powered by itself, but draws power from PIXAPRO power pack PowerPack Dual Output (sold separately). For the instructions of the power pack, see the related user manual.
Page 5
Press MODE Selection Button (18) to enter M mode. In this mode, you can set the flash unit onto your camera hot shoe or your trigger hot shoe for firing. Before shooting, adjust the power output of the HyBRID360. When the camera’s shutter Flash Output is pressed, the flash will fire.
Page 6
Then you can press the camera shutter-release button to trigger the flash. To enter mode, press both Mode Selection Button (18) and Set Button (19). You can also hold the transmitter in hand to control your off-camera HyBRID360. Press Mode Selection Button (18) again to exit mode.
Page 7
-15° to 90° Vertical Rotation Angle Horizontal Rotation Angle 0 to 270° PIXAPRO PowerPack Dual Output lithium Battery Power Supply 450 (with PowerPack Dual Output power pack) Full Power Flashes Approx. 0.05-4.5s (with PowerPack Dual Output)
Need help?
Do you have a question about the HyBRID360 and is the answer not in the manual?
Questions and answers