Cleaning And Maintenance - IRIS BLW-C2 Manual

Blanket warmer
Hide thumbs Also See for BLW-C2:
Table of Contents

Advertisement

Available languages

Available languages

HOW TO USE
4. Press START/ON button.
This product will display the remaining time after it starts running . It
will stop heating after set time has run out, and then it will cool down
the main body and hose with a 20 second air blast before it stops
running .
If START/ON button is not pressed, product will return to standby
mode after five minutes .
Press CLEAR/OFF button if you want to stop drying . It will stop
heating and then it will cool down the main body and hose with a
20 second air blast before it stops running .
6. Put away the product after use.
Firmly grip the power plug to unplug it from the electric socket .
Refold the hose .
Bundle up the power cord .
Various Uses (manual settings)
Please close the air flap before use .
Closet and Wardrobe
Keep the main body upright and closet door open . Point the air outlet
towards the closet and run the product at "Low Temperature" mode
(Yellow) .
Please do not place the main body inside
the closet .
CAUTIONS
Keep the closet door and drawers open
wide while in use .
Underneath the Sink
Keep the main body upright and cabinet door open . Point the air outlet
towards the cabinet and run the product at "Low Temperature" mode
(Yellow) .
START/ON
11

CLEANING AND MAINTENANCE

Please perform cleaning and maintenance after the product has cooled down . Not doing so may
CAUTIONS
cause burns or electrical shock . Unplug the power plug from the electric socket before cleaning .
Air Filter (clean once a month)
Use a vacuum hose/nozzle or other cleaning device to clear the
air filter .
A clogged or dirty air filter will cause the product to function
poorly .
Please replace the air filter when it is broken or has holes . Please
contact IRIS USA, Inc . Customer Service for assistance .
1. Remove dust with a vacuum hose/nozzle.
2. Remove the cover to clean the dust on the air entry ports.
Main Body
Use a cloth with diluted neutral cleaning agent to wipe the
product .
Use of strong cleaning agents such
as amylacetic ester, alcohol, oil, etc .
CAUTIONS
can cause fading, deformation or
breakdown .
Air entry ports
Air entry port
Cover
12

Advertisement

Table of Contents
loading

Table of Contents