ZyXEL Communications C4000LZ Quick Start Manual page 10

Follow these steps to add a WPS-enabled device to the wireless
network using the WPS button.
Set Up a Wireless Network Manually
The wireless LAN on your Device is enabled by default. To add a
wireless client to the network, use the settings found on the bottom panel
of your Device.
Configure wireless devices that you want to connect to the wireless
network to use the same wireless settings as the Device.
The default wireless settings vary for each Device. Refer to the label of
your Device and use the provided information.
Place the devices you
want to connect near one
another.
Press the W PS button on
the Device.
Press the W PS button on
a compatible device
within 2 minutes of
pressing the button on
the Device.
The front LED light on
the Device blinks white
when connection is in
progress and blinks white
and green when
connected.
10