Magtek DynaFlex Quick Installation Manual

Overview
DynaFlex and DynaFlex Pro are ready to launch your payment environment
to the next level. All DynaFlex products offer an integrated secure card
reader authenticator for magnetic stripe cards, EMV chip cards (contact and
contactless), and NFC enabled mobile wallets including Samsung Pay
Google Pay , and Apple Pay . DynaFlex Pro offers a color, touchscreen
TM ®
display for added convenience. DynaFlex products are made from molded
rubberized black plastic with matching black lens on the face. Custom colors
and silkscreened logos are available with a minimum order size.
Major Components
DynaFlex and DynaFlex Pro Major Components
(Touchscreen applies to DynaFlex Pro models only)
DynaFlex and DynaFlex Pro Major Components
Environmental Notice:
Storage tempertature 14° to 140°F (-10°C to 60°C)
Operating temperature 32°F to 113°F (0°C to 45°C)
Quick Installation Guide
Setup and Installation
Top Face
Underside
MagTek ® Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
DynaFlex and DynaFlex Pro
Secure Card Reader Authenticator
Models
PN Description
21078007 DYNAFLEX, PCI, NO DISPLAY, BLACK, USB
,
SM 21078008 DYNAFLEX, PCI, NO DISPLAY, BLACK, BLUE-
TOOTH LE
21078009 DYNAFLEX PRO, PCI, TOUCHSCREEN DISPLAY,
BLACK, USB
21078010 DYNAFLEX PRO, PCI, TOUCHSCREEN DISPLAY,
BLACK, BLUETOOTH LE
21078011 DYNAFLEX PRO, PCI, TOUCHSCREEN DISPLAY,
BLACK, 802.11 WIRELESS
21078012 DYNAFLEX PRO, PCI, TOUCHSCREEN DISPLAY,
BLACK, ETHERNET
Mounting / Stability
DynaFlex devices can be used in countertop (traditional brick and mortar),
mounted (to a touchscreen, holster, or other solution), or handheld solutions
(brought to the table with wireless models only). Each device has three (3)
non-slip grip feet for better stability for countertop solutions.
How to Connect to USB Host
Devices connect to a host via the USB-C plug located on the bottom of the
device. For best results, use the cable that is included with the device, it includes
shielding at both ends of the cable to reduce emissions and interference.
Compatible with USB Hosts: Windows 10, Android 4.4.2 and above.
Commands
Devices are designed to connect to a host which sends commands and data
back and forth. In any solution, DynaFlex or DynaFlex Pro must be connected
to a host with software installed that knows how to communicate with the
device and is capable of processing transactions. Follow the installation
and configuration instructions provided by the vendor of the host or the host
software for use. For development of applications, see the SDKs and APIs
on www.magtek.com under support.
Power
•
To power on the device, connect it to a USB host. Upon connecting to
a Windows 10 host, the display and LEDs turn on briefly, then turn
off when Windows suspends the device's USB connection to conserve
power. To turn the display and LEDs back on, connect to the device
using software on the host (for example, by using the Open Device
button in 1000007406 DynaFlex, DynaProx Test Utility, available from
MagTek), which signals Windows to resume the USB connection and
provide full power to the device.
•
To power off the device, disconnect it from the USB host.
Color Touchscreen
DynaFlex Pro's color touchscreen can display a logo or custom messaging
and depicts on-screen instructions for insert, tap, or swipe operations. The
screen is inset and measures 2.27in. (57.60mm) X 1.70 in. (43.20mm),
320x240 RGB.
Display Connection(s)
None USB-C
None USB-C
Bluetooth LE
Touchscreen USB-C
Touchscreen USB-C
Bluetooth LE
Touchscreen USB-C
802.11 Wireless
Touchscreen USB-C
Ethernet