Bissell REVOLUTION PET PRO Quick Start User Manual page 8

Filling Your Clean Water Tank:
For Future Use if selecting Antibacterial Formula with EasyFill
1
The Clean Water
Tank is at the top
of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
4
A few notes about fi lling the Clean Water Tank:
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
• When using BISSELL Antibacterial formula: Only fi ll your Clean Water
Tank with the recommended amount of water and formula to achieve
antibacterial benefi ts.
NOTICE: Do not overwet carpet. Be careful not to run over loose objects or edges
of area rugs. Stalling the brush may result in premature belt failure.
NOTICE: BISSELL Antibacterial formula is only for BISSELL machines with EasyFill
System.
8
www.BISSELL.com
2
Lift the tank straight
up to remove from the
machine.
After filling the tank with
hot tap water, twist the
yellow cap back onto the
tank.
Firmly insert the full size
formula bottle into the cap
on the tank and squeeze
until formula reaches the
EasyFill line.
3
Unscrew the cap from the
tank. Add hot tap water to
the water fill line.
5
At the bottom of the Upper
Handle, align the tank with
the grooves and slide the
tank into place.