Subscribe to Our Youtube Channel
Related Manuals for XU1 XBS-810
Summary of Contents for XU1 XBS-810
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 XBS-810 0620...
- Page 2 1 Soft Grip Front Handle 5 Soft Grip Rear Handle 9 Drive Belt Cover 2 On/Off Trigger 6 Tension Release Lever 10 Belt Tracking Knob 3 Lock-On Button 7 Sanding Belt 4 Dust Extraction Chute 8 Dust Bag...
- Page 3 SPECIFICATIONS OPERATION Tracking Adjustment WARNING! Ensure body parts, cords, 810W Input Power: workpieces and any loose items are clear WARNING! Prior to sanding, please check of the sanding belt before performing the Input Voltage: 230-240V ~ 50Hz that workpieces to be sanded are free of nails, tracking adjustment operation.
- Page 4 4. Refit cover and tighten screws. Note: XU1 will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
- Page 5 SAFETY ELECTRICAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS INSTRUCTIONS WARNING! When using mains-powered WARNING! Read all safety equipment, basic safety precautions, warnings and all instructions. Failure including the following, should always be ALWAYS WEAR EYE, FACE AND to follow the warnings and instructions may followed to reduce risk of fire, electric shock, EAR PROTECTION result in electric shock, fire and/or serious...
- Page 6 ADDITIONAL SAFETY or a key left attached to a rotating part of the power such as those dust masks that are tool may result in personal injury. specifically designed to filter out microscopic INSTRUCTIONS FOR BELT particles. e) Do not overreach. Keep proper footing SANDERS and balance at all times.
Need help?
Do you have a question about the XBS-810 and is the answer not in the manual?
Questions and answers