Related Manuals for XU1 XDS-300
Summary of Contents for XU1 XDS-300
- Page 1 XU1 Power tools 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 XDS-300 0518...
- Page 2 1 On/Off Switch 3 Dust Bag 2 Palm Grip 4 Hook and Loop Backing Pad...
-
Page 3: Specifications
(rated at 30mA or less). Note: For the dust bag to work at its optimum level, Note: XU1 will not be responsible for any damage empty when it becomes 1/3 full. This allows air to flow or injuries caused by the repair of a tool by an through the bag freely, increasing its effectiveness. - Page 4 WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY.
-
Page 5: Electrical Safety
SAFETY battery pack, picking up or carrying the General Power Tool Safety tool. Carrying power tools with your finger on the Warnings INSTRUCTIONS switch or energising power tools that have the switch on invites accidents. WARNING! Read all safety d) Remove any adjusting key or wrench ALWAYS WEAR EYE, FACE AND warnings and all instructions. - Page 6 ADDITIONAL SAFETY capable of filtrating particles generated direction opposite to the wheel’s movement by your operation. Prolonged exposure at the point of snagging. INSTRUCTIONS FOR to high intensity noise may cause d) Use special care when working SANDERS hearing loss. corners, sharp edges etc.
Need help?
Do you have a question about the XDS-300 and is the answer not in the manual?
Questions and answers