Buffalo DB162 Instruction Manual page 3

• BUFFALO recommend that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing
should include, but not be limited to: Visual Inspection,
Polarity Test, Earth Continuity, Insulation Continuity and
Functional Testing.
• BUFFALO recommend that this product is connected to a
circuit protected by an appropriate RCD (Residual Current
Device).
Product Description
DB162 - Knife Steriliser
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
Pack Contents
The following is included:
• BUFFALO Knife Steriliser
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Installation
• Ensure you have adequate support to support
the appliance and proceed to drill and install the
fixing screws.
• Once the screws are installed, locate the
appliance on the wall by aligning the locating
holes on the back plate with the screws.
Warning: Ensure the substrate
and fixings used to mount the
Knife Steriliser are suitable to
support the weight of the loaded
unit.
If necessary, seek professional
help to ensure the shelf is safely
mounted.
DB162_ML_A5_v3 20210125.indb 3 DB162_ML_A5_v3 20210125.indb 3
• Instruction manual
UK
3
2021/1/25 11:03 2021/1/25 11:03