Table of Contents
Advertisement
USING AUTOMATIC NEEDLE THREADER
1.
Lower the presser foot.
2.
Raise the needle.
Lower the needle threader lever slowly. Pass thread
3.
round hook as inset A.
4.
Lower the lever to its lowest position. Thread hook
passes through needle eye.
5.
Bring thread from hook A to the right side under the
hook.
6.
Hold the thread loosely, release the lever. A thread
loop will pass through the needle eye.
7.
Pull out the thread loop through the eye of the
needle. Pass a 10 cm length of thread under the
presserfoot.
NOTE:
The needle threader is used with needles :
sizes 11,14 and 16
6
1 2
4
Threading lever
Thread guide
Hook
7
9
3
5
Needle's eye
A
Thread guide
Hook
Advertisement
Table of Contents
