Lenovo Tab P10 Series Hardware Maintenance Manual page 26

Hardware Maintenance Manual
• Logic card to plastic
• Torque driver
• Make sure that you use the correct screws. If you have a torque screwdriver,
• Ensure torque screwdrivers are calibrated correctly following country
22
Turn an additional 180° after the screw head touches the surface of the logic
card:
If you have a torque screwdriver, refer to the "Torque" column for each step.
tighten all screws firmly to the torque shown in the table. Never use a screw
that you removed. Use a new one. Make sure that all screws are
tightened firmly.
specifications.
more than 180°
(Cross-section)