Antenna Grounding & Connection - GE Quadcore HD User Manual

ANTENNA GROUNDING & CONNECTION
The National Electric Code (NEC) requires your outdoor antenna
installation to be properly grounded. This involves grounding
the antenna and the antenna mounting structure. This helps
protect you and your property in the event of static buildup on
the antenna or lightning near your home.
NOTE: If you had a satellite or cable system installed at your
home, you may be able to use some parts from this system for
your antenna installation.
1. Ground the Antenna Mount: Attach a #8 aluminum or a
#10 copper grounding wire to the antenna mounting
structure, such as a pole, mast, tower, etc. In some cases,
a bolt on the mount can be used for making this
connection. When using the provided J-mount, use the M5
bolt and M5 nut in the hole on the J-mount located above
the mounting bracket to make this connection (Fig. 5a).
Tighten this connection securely. Ensure there is a good
electrical connection between your mounting structureand
grounding wire. Run the grounding wire as straight as
possible and use standoff insulators spaced four (4) to
six (6) feet apart. Attach the grounding wire to an
acceptable building ground location. See Grounding Block
How-To for a list of acceptable building ground locations.
(Fig. 5a)
11