GE Quadcore HD User Manual page 10

4. Installing the Assembled Antenna
a. Locate a position on the house that is far away from
power lines. Refer to the Important Safety Instructions.
b. Secure the mounting bracket to the location selected
or the antenna. The 2in. X 50.8mm lag screws have
been provided for some installations.
c. Connect the J-mount to the mounting bracket
(Fig. 4a) using the M6 X 50mm bolts, M6 locking nuts
and M6 washers.
d. Position the J-mount perpendicular to the ground using
a small level.
e. Slide the antenna onto the J-mount (Fig. 4b). Face the
antenna elements toward the broadcast towers in your
area. Tighten the wing nuts on the U-bolt when the
antenna is in the desired position.
f. Apply the provided DANGER label to the base of the
mounting structure in a clearly visible location if your
antenna mounting structure, such as a mast, J-mount
or pole, does not already have one.
10
(Fig. 4a)
(Fig. 4b)