Download Print this page

Coolmax CD-310-eSATA Installation

Coolmax cd-310-esata: install guide

Table of Contents

Download this manual

1. Please plug the power adapter and USB cable then turn on the switch.

2. Once connections are complete, Windows will automatically enumerate (establish a

drive letter for the device), and the blue LED on the device will start blinking.

3. After a few seconds, when the blue LED stops blinking, the device is ready for use.

Then a pop-up window will appear, as in the diagram below, to indicate the presence

of the USB device. This device will be recognized by the computer as a USB device.

1. Please right click the green icon in the control bar and safety removal the hardware.

Chapter 1 Installation

Table of Contents

Do you have a question about the CD-310-eSATA and is the answer not in the manual?

Page 1: Chapter 1 Installation
█ For USB 2.0 device Installation 1. Please plug the power adapter and USB cable then turn on the switch. 2. Once connections are complete, Windows will automatically enumerate (establish a drive letter for the device), and the blue LED on the device will start blinking. 3.
Page 2 █ For ESATA device Installation 1. Please plug the power adapter and ESATA cable then turn on the switch. 2. Once connections are complete, Windows will automatically enumerate (establish a drive letter for the device), and the blue LED on the device will start blinking. 3.
Page 3 2-b. Please find the model name of HDD that you used in the “Disk drives”. Right click and choose “Uninstall” to safely remove the device. Notice: Please note that the string “SCSI Disk Device” represented E SATA device. 2-c. Click on “OK” to remove.
Page 4 2-d. Click on “Yes” to restart your system and the drive will be removed...
Page 5: Chapter 2 Faq
The system could not detect the device. What should I do? Ans：Please follow the step to check the issue. a. Please make sure the BIOS are setting to “Default“and then restart the system. Or you can content the system provider. b.