Advertisement
Figure 11.
Figure 13.
Figure 15.
Customer Support (831) 786-1370
E-mail: sales@photoflex.com
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. OctoDome
trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S. and
other countries.
PHOTOFLEX
WARRANTY
®
• Warranties only cover manufacturer's defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
For detailed specifications, product tutorials and more, please visit www.photoflex.com®
Figure 12.
Figure 14.
Figure 16.
®
, QRC
®
, Photoflex
®
and the Photoflex logo are
Figure 11. The face diffuser is rimmed with Velcro material that attaches
to its counterpart that lines the front of the OctoDome. Find a corner of
the diffuser and line it up with the corner of the OctoDome face. Starting
at one corner, press the face diffuser in place. Work your way around the
rim of the softbox until the diffuser is in place.
Figure 12. Your softbox is now fully constructed.
Figures 13 and 14. When using the optional grid accessory (sold
separately,) the face should be attached at a one inch recess.
Figures 15 and 16. The softbox is built and ready to attach to your light
head. Place the dome face down on the floor with the connector facing
up; then securely lock the light onto the connector. It also helps to raise
the LiteStand® to your approximate height before lifting the light and
dome assembly onto the stand. Make sure to always tighten the light
fixtures set screw to the stud on the LiteStand.
Advertisement
