HAMPTON BAY HB2113LED-237 Use And Care Manual page 6

Installation (continued)
3
Securing the fixture base

Carefully tuck all the wires and wire
connections into the outlet box.

Place the fixture pan (A) over the outlet
box and feed the mounting screws (BB)
through the keyhole slots.

Slide the fixture pan (A) so that the
mounting screws (BB) slide into the
narrow ends of the keyhole slots.

Tighten the mounting screws (BB) so that
the fixture pan (A) is secured flush
against the ceiling.
4A
Assembling the fixture using the slide method
NOTE: If you do not have sufficient room to slide
the acrylic shade (B) into the fixture pan (A),
proceed to installation instruction 4B.

Place one end cap (C) on the fixture pan
(A) and secure it by screwing the thumb
nut (DD) onto the nipple at the end of the
end cap (C).

Slide the acrylic shade (B) into place and
secure the other end cap (C) into the
fixture pan (A) by securing the thumb nut
(DD) onto the nipple.

The installation is complete.
C
DD
B
6
BB
A
CC
A
DD
C
A