—WATER CONNECTION— Place the unit on a level surface, such as a benchtop or floor. In an environment with little to no ventilation, place the unit in a central location. In a ventilated area, place unit near the intake end. When the unit is in the desired location, connect a water supply to the female 6 mm / 1/4 inch inlet.
—TROUBLESHOOTING— No Fog: Check for motor rotation. If motor is operating properly, there will be an adequate amount of water in the pan (1/4” to 1-1/4”). If the pan runs dry, the float valve may be sticking in the up posi- tion.
—MAINTENANCE— • Regularly clean the Reservoir Pan Assembly with soap and water to remove dirt and sediment. Use liquid bleach after cleaning, to sterilize any parts if algae was present. • Periodically remove Strainer Screen and thoroughly flush. Also check to make sure the tapered pump/fan blade assembly is free of debris.
Page 8
All design and specifications herein are subject to change without cifications herein are subject to notice for product improvement. Contact Ideal Air for oduct improvement. Contact Id details, updates and other information. ls, updates and other informatio Exclusively distributed by: www.sunlightsupply.com...