Bryant 657A User's Information Manual

Single packaged heat pump units sizes 024-060

Hide thumbs Also See for 657A:

Download this manual

NOTE TO INSTALLER:

This manual should be left with the equipment

owner.

user's information manual

SINGLE PACKAGED

HEAT PUMP UNITS

Model 657A Packaged Heat Pump Units Without Base Rail

Model 657A Packaged Heat Pump Units With Optional Base Rail

Cancels: OM02-53

WARNING: Before performing recommended main-

tenance, be sure main power switch to unit is turned

off. Electrical shock could cause personal injury.

657A

Sizes 024-060

OM02-65

1/03

Need help?

Do you have a question about the 657A and is the answer not in the manual?

Page 1 This manual should be left with the equipment owner. Model 657A Packaged Heat Pump Units Without Base Rail Model 657A Packaged Heat Pump Units With Optional Base Rail Cancels: OM02-53 WARNING: Before performing recommended main- tenance, be sure main power switch to unit is turned off.
Page 2 The FAN switch offers two options for controlling the blower: AUTO and ON. When set to AUTO, the blower will run dur- ing the time the heat pump is operating. When the FAN switch is set at the ON position, the blower will run continuously.
Page 3 Operation of the EMERGENCY HEAT source may be required if heating demands exceed the capacity of the heat pump, or if the heat pump malfunctions. • Do not operate your unit in the heating mode when outdoor temperatures are above 66°F unless you set your thermostat...
Page 4: Unit Support
Ask for further details. WARRANTIES Unit 657A has a separate warranty located at the back of this book. Be sure to read the warranty care- fully to determine the coverage for your unit. FOR THE RECORD Record the model, product, and serial numbers of your new equipment in the spaces provided below.