Page 2
Understand indicator light of air quality ..............11 Disassembly and installation methods of the back cover ........12 Placement of air purifier................... 13 Install filter net......................14 Understand functions of the filter net..............17 Howtouse......................22 Function description of control panel.
Page 4
Please insert the plug fully int o power socket before starting t he air Attention purifier. Please turn off power of the machine if any of the following conditions occurs: Electric shock or overheating, even fire accidents may occur if the plug is not fully If any one switch does not work.
Page 5
The room must be ventilatedw hen using this air purifier together with 2.Product introduction the electric heater. Or, carbon monoxide poisoning may happen. Indicator light of air quality This air purifier is unable to eliminate carbon monoxide. Prohibited to use this air purifier in the room with fumigation pesticides.
Page 7
Disassembly and installation methods of the back cover 3.Before use 1. Disassembly method of the back cover Understand indicator light of air quality Hold groove of the back cover ,pull out the magnetic door holder .SIightly lift up the back cover. Indicator light of air quality reflects current air quality.
Page 8
19.68 inch 19.68 inch p 39.37 inch 19.68 inch 19.68 inch 19.68 inch...
Page 9
2. Hold groove of the back cover ,pull out the magnetic door holder .SIightly 5. Put the filter assembly back into the purifier. lift up the back cover. 6. To reinstall the back cover,align and insert the fixed groove,then exert 3.
Page 14
Filter reset When finished replacing the filter nets, please press the filter reset button for 3 Press filter reset button, filter reset function will work, and the indicator light of filter reset will be on. press filter reset button again, the air purifier will be out of filter reset function, the indicator light of filter reset will be off.
Page 16
Operation steps: 4. Remove partcles with sof brush o r vacuum cleaner. Clear the filter net with water 1.Turn off the power to stop the air purifier. and mild soap-suds and put the filter net into machine after it is completely dry. 2.
Page 17
6. Reinstall the back cover Change compound filter net Information When the machine starts sending out beeping sound, and filter replacement indicator flashes , it is to alert the user to replace the corresponding filter. 7. Insert power plug. 8. Turn the power on and start the purifier. ATTENTION: Please turn off the power and unplug power plug before replacing the filter net.
Page 18
HI NT: 3.Remove the filter nets. Please remove plastic packing of each filter net before putting them into the machine, and make sure the label of filter net on one side is facing upward. Operating steps: 1.Turn the power off to stop the air purifier.Then unplug the power plug. 4.
Page 19
on the control paneL 5. Install the filter nets Long-term idling Unplug the power plug. ( Power is consumed even under ready mode.) Thoroughly wipe interior dry. (Equipment fault can be caused by rustJness.) Put the machine in a dry and ventilated place. (Placed flat or upside down may cause faults.) 6.
Need help?
Do you have a question about the BKJ-33 and is the answer not in the manual?
Questions and answers
Our air purifier stopped working after making a loud banging sound. Could it be the blower motor. It turns on but won't blow