Do you have a question about the KJ800 and is the answer not in the manual?
Questions and answers
Tammy
February 26, 2025
The unit got red & smelled hot. Colzer kj580
1 comments:
Mr. Anderson
February 26, 2025
If the Colzer KJ800 unit shows a red light, it typically indicates poor air quality (air quality index above 151) or that the filter needs to be replaced if the indicator is flashing red. If the unit also smells hot, it could indicate an electrical or overheating issue. In this case, turn off and unplug the device immediately and contact customer service for assistance. Do not attempt to repair it yourself.
Page 1
AIR PURIFIER Model No.: KJ800 PM2.5 User Manual Thank you for using the machine. Please read this instruction carefully and keep it for future reference. Please refer to the actual product, the image in the instruction is for reference only.
Page 2
READ AND SAVE THE INSTRUCTION IMPORTANT SAFETY NOTES This product should only be used in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury. While using electronic appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and body injury including the following: Before Use ●...
Page 3
Notice of Cleaning ● Please do not clean and reuse the composite filter; please do not clean the device with corrosive chemical cleanser. ● To avoid any damage or malfunction of sensors, please clean the device with soft cloth. ● To avoid any damage, electric shock or fire, please do not clean the device with ethyl alcohol or organic solvent.
Page 4
Catalog Product Parts User Instructions Operating Instructions Cleaning and Maintenance Common Problems Technical Specifications...
Product Parts Product Panel Description Left Handle Left Clasp Air Outlet Control Area Top Cover Right Handle P M 2. 5 Display Area Right Clasp Including status indicator and numerical display Right Air Inlet Front Shell Sensor Power Line Port Casters Purification Principle PM2.5...
Page 6
User Instructions Filter Replacement Shut down and power off the main unit. (Figure 1) Open the door cover, catch the button position of the door cover, and pull it out. (Figure 2) Remove the filter in turn and wrap the waste filter with a garbage bag to prevent the pollutants on the filter from falling into the room.
Page 7
Operating Instructions Operating Instructions Connect the power to enter the standby configuration, the power indicator lights up. “ON/OFF” Button Press “ON/OFF” button to turn on/off the device. “AUTO” Button Press “AUTO” button, on/off the auto mode. When under auto mode, the device will be adjustment the fan speed (1-4speeds) automatically according to the air quality.
Page 8
Operating Instructions “WIFI” Button Please download "Smart Life" APP and follow the instructions to control COLZER KJ800 Air Purifier. “SLEEP”+”TIMER”=”LIGHT” Button When under auto mode, press “SLEEP” and “TIMER” button 3s, on/off the light mode. a.When turn on the light mode, after 30s, the device will only adjust the mode...
Cleaning & Maintenance Please unplug the machine if not being used. 1. Clean the body 1) Use a soft cloth to remove the stain. 2) Stubborn stains that cannot be easily erased can be wiped with a moderate amount of neutral detergent on a soft Note: Do not scratch the machine casing with hard objects during maintenance.
Common Problem Common Problem Fault phenomenon Possible causes and solutions 1.The power plug is not plugged in; replug the power plug. The machine does 2.Check if the front cover is in place. not start 1. The bag of the filter is not removed; remove the bag and reinstall the filter.
Technical Specifications The Main Technical Parameters Product name Air purifier Model name KJ800 Rated voltage 100~120V Rated frequency 60Hz Rated input power Noise ≤66dB(A) CADR (particles) 470 CFM Unit size 17*17*30.9 inch Net weight 27.33 lb Gross weight 32.18 lb...
Need help?
Do you have a question about the KJ800 and is the answer not in the manual?
Questions and answers
The unit got red & smelled hot. Colzer kj580
If the Colzer KJ800 unit shows a red light, it typically indicates poor air quality (air quality index above 151) or that the filter needs to be replaced if the indicator is flashing red. If the unit also smells hot, it could indicate an electrical or overheating issue. In this case, turn off and unplug the device immediately and contact customer service for assistance. Do not attempt to repair it yourself.
This answer is automatically generated