Networking; Connecting To A Wireless Network; Connecting To A Wired Network - Akai AK5520NF User Manual

Networking

You can set up your TV so that it can access the Internet through
your home network using a wired or wireless connection.

Connecting to a Wireless Network

• Press the MENU button on the remote to select TV
Settings > Network.
• Change network type to 'Wireless' and press OK. The TV
will automatically search nearby Wi-Fi access points. When
done, it will display a list of available networks.
• In the list of networks, press the
your home network, then press the OK button.
• When the Wi-Fi password entry screen appears, use the
on-screen keyboard. Use the
the remote control to select a character and press OK to
enter it.
• Input the correct password, select 'Connect' and press
the OK button to connect to the network. If connection is
successful, a tick will appear next to your Wi-Fi networks's
name.
/ button to select
/ / / buttons on
If the TV isn't connecting to the
internet check the troubleshooting
section for more info!

Connecting to a Wired Network

• Connect an ethernet cable to the LAN port on the back of
the TV.
• Press the MENU button on your remote to select TV
Settings > Network.
• Change the Network Type setting to 'Wired'. The TV
will automatically pick up the network setting from the
modem and connect to the network. If connection is
successful, you will see 'Connected' on-screen.
• Press the EXIT button to close the menu.
Make sure you have an
ethernet cable on hand if
you want to connect to a
wired network.
NETWORKING | 17