Philips HTR5205 Service Manual page 8

System , Region Code , etc. Setting Produre
1)System Reset
a) switch source to DISC 6CH
b) press and hold buttom on front panel
c) VFD will display reset, then sysytem power down and return to
original default setting
2)Version & Region Code Change
a) switch source to DISC 6CH
b) press"9" "1" "0" on R/C
c) press volume + / - key on R/C to choose desired one
5 regions:
EU 12 / UK 05 / APAC 98 / US 98
d) press OK key to comfi rm
3)Check on the Sofeware Version
a) switch source to DISC 6CH
b) press "1" "5" "9" buttom on R/C
c) VFD will display the version
6)Upgrading new sofeware
a) copy fi le HTR5200.ROM to root directory of USB disc
b) switch source to 6CH
c) insert USB disc to HTR520X USB socket
d) VFD will display UPGRADE
NOTE: during software upgrade ,you must not press any key and
power down.
After software upgrading completed ,move USB will display
on VFD ,now ,you must power down.
C A UT ION !
T his information is c on nc ial and may not
be dis tributed. O nly a qua d s ervic e
pers on s hould reprogram the R egion C ode.
2 - 1
2 - 1