Hyundai Bibione 1 Instruction Manual page 37

WARNINGS
Safety precautions
A) To avoid fire, do not dry clothes or leave any towels in the sauna.
B) To prevent burns or electric shocks, do not touch or use metal tools on the net cover
of the far infrared heater elements.
C) While in the sauna, do not touch the light bulb. If the bulb needs to be changed,
switch it off and wait until the sauna is shut off and the bulb is cool
D) Do not spray water on the far-infrared tube. This activity may result in electric shock
or damage to the heater elements.
E) Do not use the infrared sauna if you have any of the following conditions:
1) Open wounds
2) Eye diseases
3) Sever sunburns
4) Elderly & weak people, especially those suffering from a disease, pregnant women
and infants are prohibited. Children over the age of 6 years may use the sauna under
the supervision of adults.
5) If suffering from a disease directly related to temperature, seek the advice of a doctor before
using.
F) Do not place pets in the sauna.
G) Do not use the sauna if you are under the effects of alcohol.
H) Do not take wather or the liquids into the sauna room.
TROUbLE ShOOTING:
Problem
Indicator light for power
supply not working
Indicator light for function
is not working
Infrared Heater
not heating up
Possible reason
The connector is not con-
nected properly
No power supply input
Indicator light is broken
The heating indicator light is
broken
The circuit board
or components are broken
The temperature sensor is
broken
The heater is broken
The wire junction
or the heater's wire is loosen
The temperature sensor
is broken
The circuit board of the relay
is not work
ENG - 37
Countermeasure
Check the connector or replace
a new one
Check the circuitry (especially
weather there is power supply
input)
Replace the circuitry panel
Replace the relevant control panel
Replace the circuit board
Check the connect is loosen
and replace it
Replace with a new one
Of the same specifications
Check and make them tight
Check junction of the temperature
sensor is loosen and replace it
Replace the circuit board
ENG