Hyundai Bibione 1 Instruction Manual page 32

3) Make sure all parts are present before installing the unit. See packing list below.
4) Place the bottom board (section 4, Sauna room diagram, p.3) in the desired location of your
sauna, and make sure which side is the front and which side is the back. See FIG-3.
FIG-3 Placing bottom floor
5) Align the backboard with bottom board's corresponding battens; make sure they are in line.
See FIG-4.
6) Align the left board with bottom board's corresponding battens; make sure left board fits
flush into backboard. See FIG-5.
FIG-5 Assembling left board
7) The latch has a guide tab that must be placed in the guide slot for alignment. Pick up the
back panel (hold it upright to the floor panel) and place the tab in the slot, do not latch at this
time. When the back wall and the front wall/side wall are set together on the floor panel,
close and latch it. See FIG-6.
FIG-4 Assembling back board
ENG - 32
FIG-6 Latching