Page 1
Model: T10069 12v Macerator Pump, 13 GPM This TRAC Macerator Pump is designed specifically for sanitation waste and fish box evacuations. The pump self-primes to six feet and incorporates a heavy-duty motor with seamless motor tube and O-ring sealed end frames. The 13 gallons (49.2 l) per minute flow rate conveniently empties any tank in minutes while the high-speed rotary cutter shreds waste, producing a higher discharge capacity.
Page 2
INSTALLATION AND MAINTENANCE INSTRUCTIONS MACERATOR PUMP Specifications Motor: Seamless can motor, 1/8 hp, thermally protected, ignition protected Lead wires: 14 GA Fuse: See motor label for fuse size Pump Type: Flexible impeller Duty Cycle: Intermittent duty only Ports Inlet: Inlet 1-1/2" (38.1mm) Barb 1-1/2" (38.1mm) Outlet: 1”...
Page 3
Plumbing Connections Pump should be mounted as near as possible to tank to minimize dry run. Pump is self-priming to a five-foot lift. To maximize efficiency, mount near the holding tank. INLET: Always install pump with a shut-off valve between pump and holding tank. Hose: Use 1-1/2”...
Page 4
This limited warranty is provided by TRAC Outdoor Products Co (TRAC) to the original consumer purchaser (purchaser) of the TRAC Pump. This limited warranty is not transferable to any other party. TRAC will at its option repair or replace any part(s) of the TRAC Pump which may be found by TRAC to be defective within three (3) years of purchase.