HP MSA 1500 cs Replacement Instructions page 3

Figure 4 Installing a power supply
6 Verifying proper operation
After replacing the power supply, check the following to verify that the
component is operating properly:
1
2
0138a
• Check the power supply status indicator. It should be green.
• On an MSA20, ensure the enclosure fault indicator is off.
• On an MSA 1500 cs, the controller LCD should display the following
message:
408 STORAGE BOX #<n> POWER SUPPLY OK
• On an EVA product, from Command View EVA
• Navigate back to the component and check the status. It should
be
• Turn off the locate function by clicking Locate > Locate Off
7 Returning the failed component
Please follow the return instructions provided with the new component.
Page 3