Advertisement
Important Safety Instructions
to a step or stairs, you should operate your robot to ensure that it can detect the step without
falling over the edge, or specify a no-go area by placing a magnetic strip provided by the
manufacturer or build a physical barrier of no less than 25 mm / 1 inch high so as to prevent the
robot from falling. Make sure the physical barrier is not a trip hazard.
The robot will move around automatically. Therefore, watch your step in the operation areas of
the robot to avoid step on it. Take care of babies, children, pets, the blind and the elderly if they
are near a running robot. Never operate your robot in a room where an infant or child is sleeping.
Ensure network access in the room so that you can view your robot working status through the
APP on your phone.
Do not move the robot randomly because it will result in positioning failure of the robot. If you
move items in the cleaning area after map creation, such as couch, tea table, or dinning table,
your robot may create a map again, which is normal.
Do not allow your robot to pick up large objects like stones, large pieces of paper or any item that
may clog your robot.
obstacle.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint,
or copier toner, or use in areas where they may be present.
Do not use your robot in explosive or volatile areas or areas easy to leak or collect static electricity,
such as a gas station.
after-sales personnel.
Non-designated detergent may cause damage to your robot.
Clean the excess water with a dry towel.
After mopping operation, the base station will dry the mop. During this process, do not pull out the
plug or disconnect power to the base station.
05
and moving parts.
or combustible materials, such as gasoline, printer
and contact
Cleaning and Maintenance
Considering the limited capacity of the dust bin and water tank, empty the dust bin and water
tank as soon as possible after hearing the alert.
When not using the base station for a long period of time, please unplug it.
for use and care.
Do not disassemble or modify your robot or alter the software by yourself. Only authorized
maintenance personnel can replace faulty components to ensure device safety.
To clean the surface of your robot, damply wet a towel or tissue with water and wipe the surface
of your robot. During cleaning, do not let liquid penetrate into your robot.
Vacuuming operation may get the side brush tangled by hair or fur and cleaning operation will
result in wastewater in water tank. Clean the side brush and water tank after operation. Keep
the water level below the Max mark on the tank
your robot.
hazardous substances may leak into underground water and enter the food chain, which harms
health and well-being. For more information about waste collection and recycling, contact your
local sanitation department.
Important Safety Instructions
except as indicated in the instructions
Contact your local regulation department
06
Advertisement
