Navitel T505 PRO User Manual page 82

# Element
Tapping on the button shows the
menu for operations with the point
marked on the map (making it a
17 "Cursor" button
destination point by pressing "Go!"
button or proceeding to the prop-
erties screen).
Saves the point marked on the map
18 "Save WP" button
as a waypoint.
Switching between the plain 2D
19 2D/3D
and the panoramic 3D map views.
Short tap on the map marks the
point for further operations with it:
20 Point on the map saving as a waypoint, adding to the
route or viewing the object's data,
and others.
Provides access to the program
21 Updates
and map update menu screen.
Button for track recording: red dot
22 Track recording – recording is on, grey dot – record-
ing is stopped.
The icon displays general traffic in-
tensity on ten-point scale. Tapping
23 Navitel.Traffic on the button shows the menu
for controlling the "Navitel.Traffic"
service.
Function
#
24
25
26
Element
Tapping on the button gives a
command to the program to cal-
"Go!" culate a route from the current po-
sition or the set initial point to the
selected point.
Tapping on the button determines
the selected point as a starting
"Set start"
point of the route (GPS-receiver
must be switched off ).
The button is active only when
there is an existing route. Pressing
"Set finish" the button continues the route up
to the selected point making it the
destination point of the route.
NAVITEL T505 PRO | 81
EN
Function