Advertisement
1. After the last available picture on the film is taken and the advance wheel
will stop, you have to rewind the film.
2. Press down the rewind button (17), see figure 7.
3. Flip up the film rewind crank handle and turn clockwise, see figure 8.
4. Take time to keep rewinding and it will be completed only when the tension
on the rewind crank drops suddenly and no more resistance exists.
5. Open the back cover and pull the rewind crank out then remove the film
for processing.
When to use flash:
1. To take pictures indoors.
2. To take pictures outdoors in cloudy conditions.
3. Your subject is in the shadow.
4. Your subject is in backlight conditions.
How to use flash:
Slide the flash switch to the ON position and the flash ready indicator will light
up, inclicating that the flash is ready and will fire automatically when taking pictures.
Note:
a. The flash ready lamp will light up for the next flash only when a few seconds
required for flash charge is passed.
b. If the flash charge time exceeds 15 seconds, the batteries need to be replaced
for their exhausted power.
Red-eye reduction lamp
What is red-eye reduction:
when the picture is taken with flash, the red-eye reduction lamp will reduce the red-eye effect.
How to use red-eye reduction lamp:
1. Slide the flash switch to ON position.
2. Press gently down the shutter button half-way and the red-eye flash lamp will light up .
3. Press the shutter button fully to take a picture .
Advertisement
