Table of Contents
Advertisement
4. Fasten the slot cover (2) to the unused slot with the removed screws.
(Figure 4)
Use the screw holes shown in the figure when mounting.
(Recommended Fasten Force: 60.8 - 82.4N
NOTE: Do not apply a force exceeding the specified
torque when tightening the screws. Otherwise,
the screw holes may be damaged.
Models M431 / M491 / M551 / M651 / MA431 / MA491 / MA551 / P435 / P495 / P555
1. Remove the slot cover (1). (Figure 1)
2. Insert the option board along the rail and fasten it with the removed
screws. (Figure 2)
(Recommended Fasten Force: 60.8 - 82.4N
NOTE: Do not apply a force exceeding the specified torque when tightening the screws.
Otherwise, the screw holes may be damaged.
cm).
•
cm).
•
English-6
4
(2)
1
(1)
2
Advertisement
Table of Contents
