Maintenance; Technical Specifications - Chacon 34237 User Manual

NOTE: Before deactivating the "alarm" function, always identify the cause of the alarm
and make sure the situation is safe.

5. Maintenance

- Test the smoke detector is working properly once a week using the test button. If the
smoke detector is working correctly, you will hear a beep. Because the alarm is very loud,
make sure you keep your distance from the unit while carrying out the test. If the smoke
detector does not emit a beep, it must be replaced immediately!
- Clean the smoke detector at least once a month to get rid of grime, dust and debris. Use
a vacuum cleaner with a soft brush and pass it over the sides and the lid of the smoke
detector. Do not remove the upper cap on the smoke detector to clean the insides.
- Do not attempt to repair the smoke detector. If the smoke detector is damaged in a way
that affects how it works, it must be replaced!
- False alarms are often caused by dust or steam.
6. Warnings
- To avoid injuries, this device must be securely fixed the ceiling in accordance with the
instructions.
- The batteries must not be exposed to excessive heat, such as sunlight or fire.
- Do not paint or cover the smoke detector

7. Technical specifications

Detection method
Power supply
Battery life
Volume
Alarm sensitivity
Area monitored
Operating temperature
optical
Sealed battery (non-replaceable)
10 years
> 85 dB at 3 m
0.123 - 0.170 dB/m
20 - 40 m2
0 °C - 40 °C