Advertisement
PDI PROCEDURES
Before Starting
Review these items:
•
Perfect Delivery documents, especially the information on battery maintenance and tire pressures
•
Checklist in the PDI and Final Delivery Checklist
Make sure you record the PDI on the appropriate pages of the checklist. The PDI is not done until this bulletin and the
checklist are both complete. Note on the repair order any repairs or problems that cannot be fixed within a few minutes.
Remove all PDI items from the trunk/cargo area, interior, and glove box.
Starting the Engine Without the Backup Fuse
To lower parasitic draw, the vehicle comes from the factory with the No. 18 BACKUP (10 A) fuse removed from the
main under-hood fuse box. With it removed, the engine will not start when you apply the clutch pedal and press the
ENGINE START/STOP button.
To start the engine with this fuse removed, you must do this:
1. Press the ENGINE START/STOP button once.
2. When the indicator blinks, touch the smart entry remote to the ENGINE START/STOP button.
Page 2 of 9
Advertisement
