Raider RD-SOG02 User Manual page 10

10 www.raider.bg
4.2. The soldering tip (4) is designed to be changed quickly and easily.
4.3. Removing and change the soldering tip (4).
Turn both tip release screws (3) anti-clockwise until they are loose enough to remove
the soldering tip (4).
Insert new tip and tighten the two locking nuts (3).
5. Environmental protection.
In view of environmental protection electrical appliances, additional accessories and
packing must be subject to appropriate processing for reuse of the compound materials.
According the European Guideline 2012/19EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that are no longer
usable must be collected separately and disposed of in an environmentally correct
manner.