CONCORD Eye-Q 4060 AF Quick Start Manual page 5

GETTING STARTED
TURNING THE CAMERA ON AND OFF
The Power Switch is located on the top of the camera.
1. Slide the Power Switch toward the (
• The lens cover will open.
• The LCD will turn on automatically.
2. To turn the camera off, slide the Power Switch away from (
Note:
To extend battery life, the camera will automatically power off after 60 seconds of
inactivity. Press the shutter button to power the camera back on.
SETTING THE LANGUAGE
When the camera is powered on for the first time, the Language, Date and Time menus will appear.
1. Turn the camera on.
• The Language Setup screen will appear on the LCD.
2. Press the joystick
3. Press the OK button by pressing the joystick in to select.
4. The next screen will read "Are You Sure?" press the joystick
or Yes.
5. Press the OK button to select.
• If you select No, you will return to the Language select screen.
• If you select Yes, all menu screens will be displayed in the new language.
SETTING THE DATE AND TIME
1. Press the joystick
2. Press the joystick
• The option will blink when it is selected.
3. Repeat steps 1 and 2 to change the date and time setting.
4. Press the OK button.
AWB
⁄ ⁄ ⁄ ⁄
) icon to power the camera on. (fig.1.1)
to highlight the language you would like to use.
ADJUST DATE
01 ⁄ 01 ⁄ 2003
OK
RETURN SET
to change the option in the blinking position until you reach the desired number.
28 SEC 28 SEC
to highlight the other options.
⁄ ⁄ ⁄ ⁄
). (fig.1.2)
to select No
ADJUST TIME
01 : 01 AM
OK
RETURN SET
28 SEC
⁄ ⁄ ⁄ ⁄
3
fig.1.1 Camera On
fig.1.2 Camera Off
LANGUAGE OPTION
English
Français
Español
Deutsch
OK
RETURN SET
A
AWB
⁄ ⁄
28 SEC
AWB