Raider RD-DH02 User Manual page 10

10 www.raider.bg
be controlled with the switch is dangerous and must be repaired.
1.4.3. Before you modify the settings of the hammer drill, working to replace instruments and ancillary
devices, and for a long time when you will not use the hammer drill, unplug the plug from the supply
network. This measure eliminates the danger of triggering of the hammer drill inadvertently.
1.4.4. Keep striking drill in places where they could not be reached by children. Do not let it be used
by persons who are not familiar with how to work with it and have not read those instructions. When in
the hands of inexperienced users, the hammer drill can be extremely dangerous.
1.4.5. Keep your shock drill carefully. Check whether the mobile units operate impeccable, whether it
spells, if there is broken or damaged item which distort or alter the functions of the hammer drill. Before
using the hammer drill, make sure that the damaged parts to be repaired. Many accidents are caused by
poorly maintained power tools and appliances.
1.4.6. Keep your cutting tools well sharpened and always clean. Properly maintained cutting tools
with sharp edges have less resistance and working with them easier.
1.4.7. Use the hammer drill, attachment, working tools, etc., according to the manufacturer's
instructions. In doing so must comply with specific operating conditions and operations to perform. Using
a drill striking than those provided by the manufacturer applications increases the risk of accidents.
1.5. Hammer drill safety warnings.
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle. Loss of control can cause personal injury.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for this
particular power. The fact that you can attach to specified device or machine working tool does not
ensure safe working with him.
1.5.2. Work with personal protective equipment. Work with face mask, eye protection or goggles. If
necessary, work with breathing mask, earmuffs (hearing protectors), work shoes or special apron that
protects you from work to dislodge small particles. Your eyes must be protected from flying into the
working area particles. Dust mask or a breathing filter dust arising from work. If you are exposed for long
periods of loud noise, this can lead to hearing loss.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under tension or
affect the power cord, hold power tool only electric insulated handles. When entering the working tool in
contact with the wires under tension, it is transmitted through the metal details of the hammer drill and
this may lead to electric shock.
1.5.4. Keep the power cord a safe distance from rotating work tools. If you lose control over the
hammer drill, the cable can be cut or fascinated by the working tool and it can cause injuries.
1.5.5. Never leave the hammer drill, before working tools to completely stop its rotation. Rotary tool
can touch the object, resulting in losing control over the hammer drill.
1.5.6. Regularly clean your vent striking drill.
1.5.7. Do not use the hammer drill near flammable materials. Flying sparks can cause the ignition of
such materials.
1.5.8. Never put your hands near the rotary working tools.
1.5.9. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the
appropriate local supply company. Into contact with the wires under tension can cause fire or electric
shock. Pipeline damage can lead to explosion. Deterioration of water has the effect of major material
damage and may cause electric shock.
1.5.10. If the supply voltage is interrupted (e.g. due to blackouts, or if the plug is removed from
contact) unblock the trigger switch and place it in position "off". This will prevent uncontrolled inclusion
of the hammer drill.
1.5.11. During operation keep striking drill firmly with both hands and lend a stable position of the
body. With both hands striking drill is kept more secure.
1.5.12. Provide workpiece.
Detail, and attach with appropriate appliances or braces is anchored more firmly and securely than if
you hold it by hand.
1.5.13. Keep your workplace clean.
Mixtures of different materials are particularly hazardous. Fine shavings from light metals can be self
ignite or explode.
1.5.14. Do not use the hammer drill, where the power cord is damaged. If during operation the cable