Advertisement
Quick Links
Model: CDR20 / CD Clock Radio
Safety information
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated 'dangerous voltage' within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before
the product is operated.
2. RETAIN INSTRUCTIONS -The safety and operating instructions should be retained for
future reference.
3. HEED WARNINGS - All warnings on the product and in the operating instructions should
be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer
Advertisement
Related Manuals for Conrad CDR20
Summary of Contents for Conrad CDR20
- Page 1 Model: CDR20 / CD Clock Radio Safety information IMPORTANT SAFETY INSTRUCTIONS TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- Page 2 as they may cause hazards. 7. WATER AND MOISTURE - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
- Page 3 16. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 17.
- Page 4 Safety information 20. SAFETY CHECK - Upon completion of any service or repair to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. HEAT -The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.
-
Page 5: Class 1 Laser Product
To prevent possible hearing damage, do not listen at high volume levels for long periods. Class II construction double insulated. This product must not be connected to earth. WARNING: DANGER OF RADIATION These labels tell you that the unit contains a laser component. Opening the CD compartment lid and defeating the safety interlocks will expose the user to radiation from the laser beam. - Page 6 Unpacking the unit Carefully remove the unit from the carton and remove all packing material from the unit. Make sure that you have all the following items: • Main unit (x1) • User manual If any item is missing, consult your dealer immediately. We suggest that you retain the original carton and packing materials in case it is necessary to return your unit for service.
- Page 7 General controls Main unit 1. CD DOOR 2. 5V1A USB CHARGING PORT 3. ALARM 1 ON / OFF 6. CLOCK SET/ PROG. 7. FUNCTION STANDBY 9. SNOOZE / DIMMER 10. 3.5MM HEADPHONE JACK...
- Page 8 11. ALARM 2 ON / OFF / TUNE UP / TUNE DN 14. PLAY MODE (REPEAT 1 / ALL / RANDOM) SLEEP / MEM MO.ST 17. LED DISPLAY 18. BATTERY COMPARTMENT FOR CLOCK BACK ONLY Display information: A. SLEEP indicator B.
- Page 9 General controls Switch on or off the unit •Press to turn the unit on or off (standby mode). Control the audio output •Press VOLUME - / + (symbols ) to adjust the sound level. The current volume shows on the display before returning to the previous display. Eco power saving mode •This unit has a built-in power saving control which will automatically switch into STANDBY mode to reduce power consumption when it detects that the unit is not in use (idle).
- Page 10 Note: • You can install DC 3V (AAA x 2) battery for clock backup. • To zero the clock, take out the battery from battery compartment and unplug the AC power 20-30 seconds. • When AC cut out or no battery installed, the clock will be automatic backup in 20 seconds.
-
Page 11: Sleep Function
Note: Please make sure CD disc is available when set the alarm source to CD. If the CD disc is not available, FM radio will be the default source. 5. Press ALARM key to confirm. 6. ALARM 2 setup is same as ALARM 1. 7. - Page 12 •CD-RW •The ability to play certain recordable discs may depend on the quality or physical condition of the disc, the quality of the recording, or characteristics of the recording device or software application. Playback cannot be guaranteed in all situations. This is not an indication of any problem with the unit.
- Page 13 3. Press to select the track for the first program location. 4. Press to store the selected track into the program location. 5. Repeat steps 3 and 4 to program more tracks. Up to 20 tracks can be programmed. 6. Press to start playback of the programmed tracks.
- Page 14 To perform auto search :• Press and hold 2 seconds on key, this unit will perform automatic scan and stop when station catch up. To perform manual search: • Press to adjust the frequency. Use this method to tune to weak or distant stations that are not strong enough to be recognized by the automatic searching.
- Page 15 Care and maintenance Compact Disc Care To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Finger prints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.
- Page 16 Technical specifications 1. General Power requirements: AC 230V~ 50Hz DC 3V (UM-4 x 2) for clock backup function. USB port for charging only, 5V === 1A Power consumption: 15W (operation), 1W (standby) Weight of main unit: 0.85 kgs 2. Amplifier section Power Output: 2 x 1 Watt 3.
Need help?
Do you have a question about the CDR20 and is the answer not in the manual?
Questions and answers