Water Connection; Power Connection; Operation - Ideal Air GSH200 700861 Manual

—WATER CONNECTION—

Place the unit on a level surface, such as a benchtop or floor. In an
environment with little to no ventilation, place the unit in a central
location. In a ventilated area, place unit near the intake end. When
the unit is in the desired location, connect a water supply to the
female 6 mm / 1/4 inch inlet.
See options as follows:
• Plumb directly to a water supply (6 mm / 1/4 inch plastic
tubing is preferred).
• Connect to a garden hose fitting.
• Plumb to a storage tank higher than the fogging unit (gravity feed).

—Power Connection—

Plug the unit directly into an electrical outlet for evaluation. Listen for
a smooth, quiet operation. Motor shaft should be centered and
vertical. Make any necessary adjustments. If the power cord is
damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.

—Operation—

WARNING: Designed for atomizing water only! Don't use flammable,
toxic or corrosive liquids.
• Operating the unit using the fogging head will provide directional
fogging output and a drier fog.
• For maximum fogging and circulation, operate unit without
fogging head. Fog will propel 4 ~ 5 feet above the unit.
IDEAL-AIR™ PRODUCT# 700861