Operation; Use; Fastening And Loosening Fittings; Technical Data - F1 IW350 Original Operating Instructions

Operation

Caution!
Unsuitable sockets can break during use and may
cause injury.
•
Use only the sockets supplied.
•
Do not hold the sockets when turning on the
impact wrench.
•
Always disconnect the device from the mains
socket before inserting or removing a socket.
Note:
•
Several attempts may be required to loosen
tight fittings. However, avoid continuously us-
ing the device for too long to prevent damage.
•
Do not overtighten small screws in particular.
Note the torque rating.
•
Rust or other debris on the threads or under
the screw heads may affect the strength of the
fitting.
•
Always let the impact wrench come to a
complete stop before changing the direction of
rotation.
•
Note the operating instructions of the respec-
tive items during use (vehicle, car jack).

Use

Fastening and loosening fittings

1. Attach the appropriate socket on the socket
adapter until it clicks into place. Make sure
that the socket is firm and secure.
2. Plug the power plug into a 230 V mains socket.
3. Verify the direction of rotation is correct before
applying the impact wrench.
•Forward (fasten)
•Reverse (loosen)
4. Press the on/off switch to switch on the
impact wrench.
Caution!
The impact wrench will continue running for a
few more turns after it has been switched off.
5. Release the on/off switch to stop the impact
wrench.
6. After you have finished using the impact
wrench, unplug the power plug from the 230 V
mains socket.
7. Remove the socket from the socket adapter
and store the device safely.
8. Use a torque wrench to verify the fitting has
the required torque.
Notice for wheel fitting:
After driving about 50 km, retighten the wheel
nuts /screws and verify they are tight.
Technic al
data
Model IW350
Item number 10787
max. torque Anti-clockwise rotation
(unscrew) 350 Nm
Clockwise rotation (screw in)
150 Nm
Idle speed n 2300 min
0
Rated voltage 230-240 V AC, 50 Hz
Rated input power: 900 W
Socket adapter size 12.7 mm
(square)
Socket size (spanner 17 mm, 19 mm, 21 mm, 22
size) mm
Sound pressure level 96,0 dB (A) / 3,0 dB (A)
L / K
PA PA
Sound power level 107,0 dB (A) / 3,0 dB (A)
L / K
WA WA
Hand-arm vibration 17,7 m/s² / 1,5 m/s²
a / K
h
Weight 3,0 kg
Ambient tempera- -20 to +40 ºC
ture
Protection class Class II
IP protection IPX0
Note:
The sound and vibration values were measured in
accordance with EN 62841-2-2.
Impact Wrench IW350
EN
-1
15